Welcome, Guest. Please login or register.

Login with username, password and session length
 

News:



Author Topic: I just had a few questions about getting audio into the touch  (Read 5538 times)

0 Members and 1 Guest are viewing this topic.

Finnyous

  • Newbie
  • *
  • Posts: 1
    • View Profile
I was just curious if anybody had tested the ivoiceIII's mic using the touch with the product to see how flat the frequency response was, and if not if anybody had any suggestions for what the flattest method would be.  I would prefer to have it be dock connected, but the most important thing is to have it as accurate as possible.


http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=171

FaberAST

  • Administrator
  • Sr. Member
  • *****
  • Posts: 318
    • View Profile
    • www.FaberAcoustical.com
Re: I just had a few questions about getting audio into the touch
« Reply #1 on: June 24, 2009, 02:13:51 PM »
Finnyous,

I haven't measured the frequency response of the iVoice III, but I have measured the iVoice Pro, and it is not particularly flat.

Take a look at a recent post on the blog.

Ben