Welcome, Guest. Please login or register.

Login with username, password and session length
 

News:



Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - remorley

Pages: [1]
1
I have SSPro 2.1.2 on an iPhone 3 GS with iOS 5.1.1 and I capture traces with the Oscope fine but every time I try to save to .txt file it crashes. It worked a couple of years ago because I have saved .txt files from back then.


2
SignalScope Pro / Horizontal scroll bar placement problem
« on: June 30, 2009, 08:08:49 PM »
By placing the horizontal scroll bar above the display it guarantees that the image the user is scrolling through and hopefully viewing is instead blocked by the finger/hand used to scroll. That scroll bar needs to be moved to the bottom of the app view.


3
SignalScope Pro / Re: Can I capture more than 100msec with SScopePro?
« on: June 30, 2009, 04:06:42 PM »
Why does it keep retriggering when set to Single?

And it seems to trigger regardless of the mode. And triggers with no input and level set to 0.1FS.

Help.
Bob

4
SignalScope Pro / Re: Can I capture more than 100msec with SScopePro?
« on: June 30, 2009, 03:56:42 PM »
Thanks for the help. I am having difficulty with my fat fingers capturing my waveform and scrolling to a place of interest on the x/time axis without accidentally restarting and retriggering. Also I'd prefer just entering the timebase rather than the pinch method.
My 2 cents.... keep the change.
Bob

5
SignalScope Pro / Can I capture more than 100msec with SScopePro?
« on: June 29, 2009, 05:02:02 PM »
I really like the ability to capture waveforms and send them out via http. I'd like to capture variable lengths of up to a second or two. There's heaps of RAM and Flash in my iPhone 3GS to use for this feature.
Thanks
Bob Morley
P.S. it would have been nice to get a discount on my upgrade from SignalScope to SigScopePro ;-)

6
SignalScope / Re: iphone accepting line level input?
« on: February 20, 2009, 09:41:15 AM »
Thanks Ben,

Are you implying that it is ok for me to connect to the line in inputs on the dock connector?
I am a Electrical Engineering Prof who wants to experiment with the iPhone's line in features and not looking to publish (i.e., get Apple's blessing) any apps at this time. Does the SDK support input from both line inputs at 48kHz sampling rate?

Bob


7
SignalScope / Re: iphone accepting line level input?
« on: February 19, 2009, 08:05:14 AM »
I just purchased SignalScope for the iPhone and generally like it a lot. However, it would be useful to be able to set the sampling frequency and recording duration of the time-domain waveform myself. It would also be useful to be able to capture the waveform to a data file to be emailed as well as to a photo as currently supported.

I don't understand why the App Store shows this app with "Line In" and stereo channels. That is misleading but I sure wish it were available!

Don't show non-existent features in the App Store.



Pages: [1]