Welcome, Guest. Please login or register.

Login with username, password and session length


Recent Posts

Pages: [1] 2 3 ... 10
SignalScope / Re: upgrade IOS to 13.3 kills SignalScope
« Last post by FaberAST on January 31, 2020, 10:35:47 AM »
Unfortunately, iOS 13 broke compatibility with legacy versions of our apps. End of support for these apps was announced in January, 2018 and they were removed from sale on the App Store in July, 2018. At that time (when iOS 11 was current), we could not have known that Apple would break them in iOS 13.

Please understand that the apps you purchased still work just fine on the versions of iOS they were developed for and you can continue to run them on compatible devices.
If you have a device running iOS 12 or earlier, you can re-download the original app you purchased from your App Store account.

If you need to always be able to run SignalScope on the newest versions of iOS, we recommend that you download SignalScope X and choose a subscription option that best meets your needs (the Advanced Tool Set most closely matches the functionality of the old SignalScope Pro).

In case you prefer to avoid subscriptions, we still offer new perpetual license versions of our products for those who need them (with the understanding that they will also be retired and replaced at some point, as the old apps were).

Unfortunately, since our app distribution must go through the App Store, we cannot offer discounted upgrades for purchases of our earlier apps, which is largely why we moved to a subscription model for our software.
A note about SignalScope X’s auto-renewable subscriptions
SignalScope / upgrade IOS to 13.3 kills SignalScope
« Last post by Bandit on January 31, 2020, 12:30:12 AM »
The original SignalScope has been useful to me as a church sound guy.  I don't have a lot of money, but I went out on a limb and spent it on this app.  I have loved it.  However, the new IOS 13.3 update killed it.  The app launches and immediately crashes.  I cannot afford to replace this with a subscription.  I have only ever used the FFT and it was awesome. 
What can I do?  Is there a competitor that has something like the FFT that is reliable and cheap?
SignalScope Pro / Re: IOS 13 breaks Signal Scope Pro
« Last post by FaberAST on September 30, 2019, 12:09:50 PM »
The end of support for the legacy version of SignalScope Pro was announced in January of 2018. The final update was published in March, 2018, and the app was removed from sale on the App Store in July, 2018.
Faber Acoustical Releases SignalScope X for iOS as a Free Download

Current alternatives:

Free Download + Subscription:
SignalScope X

Perpetual License
SignalScope Pro 2018
SignalScope Advanced 2018

The Advanced Tool Set subscription in SignalScope X and SignalScope Advanced 2018 most closely match the functionality of the old SignalScope Pro.

Subscriptions are recommended for anyone who plans to always run SignalScope on the latest version of iOS.
Perpetual license versions are recommended for those who need to run SignalScope as a dedicated instrument. This means on a device dedicated for measurement/analysis/data acquisition that can continue to serve its purpose indefinitely without the need to upgrade iOS. (Of course, upgrading iOS is fine in this case, as long as it is supported by the perpetual license version of the app.)
SignalScope Pro / Re: IOS 13 breaks Signal Scope Pro
« Last post by stevensrs on September 30, 2019, 09:34:17 AM »
Still broken on 13.1 with a fresh download of the app.  So I'm guessing support for this app has ended?
SignalScope Pro / IOS 13 breaks Signal Scope Pro
« Last post by stevensrs on September 26, 2019, 08:37:07 AM »
At least on my phone 6S.  I rolled back to 12.4.1.  I know support for this product is limited, but It would be nice if it still worked on current version of IOS seeing that it does all I need it to do, is not subscription based, and was reasonably priced when I purchased it (unlike the new offerings).
SignalScope / MOVED: Triggering
« Last post by FaberAST on December 17, 2018, 08:44:29 PM »
SignalScope / Re: Triggering
« Last post by tinskip on December 08, 2018, 05:12:59 PM »
OK.  I'm going to answer my own question: You have to select a trigger in the Display tab.
SignalScope / Triggering
« Last post by tinskip on December 07, 2018, 10:59:13 PM »
This is a very basic question, but here it goes.  I am using SignalScope to display an audio waveform.  In this case 440 Hz sine wave.  The display shows an amplitude of about 1 FS, with the waveform bouncing all over the place for lack of re-triggering the scope scan.  Now, I have enabled triggering, created a trigger on the same input, set the threshold to 10 mFS, trigger on positive, auto mode.  Waveform still bouncing all over the place.  I have tried just about every combination of mode, threshold, and slope to not avail.  What am I missing?
SoundMeter / Re: Calibrate MicW i437L
« Last post by FaberAST on October 01, 2018, 06:29:07 PM »
According to MicW's current instructions, you should set the device gain to Mid and the device units to FS. Then, set the sensitivity for the input channel according to the value that was written on the sheet that came with your i437L (e.g. 19.9 Pa/FS). (Make sure input channel units are set to Pa.)

We just tested this, today, with an iPhone X and XS Max, and the results agreed within 0.1 dB of a 94 dB field calibrator on both devices.

Keep in mind that the sensitivity given by MicW is valid for the Mid gain setting, only. If you want to measure higher or lower SPLs which would require Low or High gain, respectively, you would need to perform a calibration at the chosen gain.
SoundMeter / Re: Calibrate MicW i437L
« Last post by stenand on September 29, 2018, 04:02:10 PM »
Hi mgolden,

just bought the same mic and I'm curious to know if you ever came around to check your calibration?

Pages: [1] 2 3 ... 10