Faber Acoustical Forum

Faber Acoustical iOS Apps => SignalScope => Topic started by: Finnyous on June 18, 2009, 10:51:28 AM

Title: I just had a few questions about getting audio into the touch
Post by: Finnyous on June 18, 2009, 10:51:28 AM
I was just curious if anybody had tested the ivoiceIII's mic using the touch with the product to see how flat the frequency response was, and if not if anybody had any suggestions for what the flattest method would be.  I would prefer to have it be dock connected, but the most important thing is to have it as accurate as possible.


http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=171
Title: Re: I just had a few questions about getting audio into the touch
Post by: FaberAST on June 24, 2009, 02:13:51 PM
Finnyous,

I haven't measured the frequency response of the iVoice III, but I have measured the iVoice Pro, and it is not particularly flat.

Take a look at a recent post on the blog (http://blog.faberacoustical.com/2009/iphone/iphone-line-input-frequency-response-comparison/).

Ben