Welcome, Guest. Please login or register.

Login with username, password and session length


Author Topic: Cross Correlation Problem  (Read 9091 times)

0 Members and 1 Guest are viewing this topic.


  • Newbie
  • *
  • Posts: 1
    • View Profile
Cross Correlation Problem
« on: April 16, 2008, 02:29:00 PM »
The cross correlation display seems to normalize so that the largest positive peak is 1.0 and the display always goes from -1.0 to +1.0.  This is a problem if correlating signals that are out of phase (the peak negative correlation sails off the bottom of the scale).  It would be better to compute an actual correlation coefficient, which normalizes on the square root of the product of the autocorrelations at zero delay.  Then autoscale on the absolute value.


  • Administrator
  • Sr. Member
  • *****
  • Posts: 320
    • View Profile
    • www.FaberAcoustical.com
Re: Cross Correlation Problem
« Reply #1 on: April 16, 2008, 03:21:27 PM »
You are correct, and your suggestion is a good one.