Author Topic: oscilloscope triggering  (Read 3984 times)

0 Members and 1 Guest are viewing this topic.

paulpiano

  • Newbie
  • *
  • Posts: 1
    • View Profile
oscilloscope triggering
« on: February 17, 2012, 02:26:53 PM »
In SS pro2, is there any way to have both traces trigger from one or the other input, like you can on a real oscilloscope? I'm trying to demonstrate phase cancellation for an acoustics class with two sine waves of almost identical f fed separately to each channel, I want to trigger both from one so that the one stands still while the other migrates left or right depending on its relative f. Years ago I used to do this with a real scope, but it appears as though though SS triggering only works on a per-channel basis. If not in Pro 2, how about in Pro 3?

FaberAST

  • Administrator
  • Sr. Member
  • *****
  • Posts: 306
    • View Profile
    • www.FaberAcoustical.com
Re: oscilloscope triggering
« Reply #1 on: February 21, 2012, 08:50:43 AM »
Paul,

Quote
In SS pro2, is there any way to have both traces trigger from one or the other input, like you can on a real oscilloscope?
Sure. In the triggering tab, select the same source for both input channels.

Ben