Welcome, Guest. Please login or register.

Login with username, password and session length
 

News:



Author Topic: DIY I/O Dock Connector  (Read 9348 times)

0 Members and 1 Guest are viewing this topic.

neodyms

  • Newbie
  • *
  • Posts: 6
    • View Profile
DIY I/O Dock Connector
« on: January 25, 2010, 04:35:30 AM »
Hi all !

Is it possible to ake a DIY I/O Dock Connector To don't have to buy a extra device ?

perhaps they re some things to do ?

How do to be this connector reconized by the software ?

are they some electronicians here ?
« Last Edit: January 25, 2010, 10:52:10 AM by FaberAST »

FaberAST

  • Administrator
  • Sr. Member
  • *****
  • Posts: 318
    • View Profile
    • www.FaberAcoustical.com
Re: DIY I/O Dock Connector
« Reply #1 on: January 25, 2010, 10:53:35 AM »
To develop accessories for the iPhone/iPod dock connector, please join Apple's Made for iPod program. Apple can then provide you with all the official specifications and documentation that you need.

neodyms

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: DIY I/O Dock Connector
« Reply #2 on: January 25, 2010, 03:38:07 PM »
All right but it's only for company

SSPRO_1

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: DIY I/O Dock Connector
« Reply #3 on: January 28, 2010, 10:10:24 AM »
I am currently working on one myself. Apple will only let you sign up for the made for iphone program if you are a company. There Are several things that need to be done to get signals into the iphone. One involves a proprietary application serial protocol where the iphone is told that it is supposed to input from the 30-pin connector's R and L stereo input. Getting signals out is easier, and is accomplished by putting a resistor across two pins on the dock connector.